Skip to content

Dodge 6.7L Cummins Diesel 68RFE HD Valve Body Channel Plate Upgrade 2011-18

SKU E255454419966
Original price $358.57 - Original price $358.57
Original price
$358.57
$358.57 - $358.57
Current price $358.57
Availability:
in stock, ready to be shipped

Delivery time

You will receive your package in 2–5 business days within the contiguous U.S.

Country/Region of Manufacture: United States

Interchange Part Number: A72742CDNJ

Modified Item: No

Type: Valve Body Plate Upgrade

Custom Bundle: No

Surface Finish: New

Other Part Number: 07 07.5 08 09 10 11 12 68RFE Truck 2500 3500 4500

Fitment Type: Direct Replacement

Non-Domestic Product: No

Manufacturer Part Number: DNJ-DCF2,68RFE-303

Brand: DNJ Components, RevMax

Items Included: Valve Body Channel Plate

DODGE RAM 68RFE Billet Aluminum Valve Body Upgrade
With Performance Separator Plate (bonded gaskets)
FITS 2011-18
6.7L CUMMINS DIESEL PICK-UP TRUCKS


The Solution for Overdrive Clutch Failure proudly Made in USA!

Per the awesome folks at DNJ Components:

Since its early production in 1999, the RFE platform has been plagued with many issues. Some of the biggest problems have been premature clutch failure and valve body wear. The premature clutch failure can be isolated to hydraulic cross leaks and warped valve bodies. Approximately 80-90% of those cross leaks have been found in the OE channel plate casting.

If you look closely at the stock casting with a straight edge, you will notice that there is some severe flexing and warpage. Looking at how the valve body is fastened to the transmission and being that there are limited contact surfaces it’s no wonder we see so many problems. For example, fourth gear clutch failure, premature valve body bores worn, and defective valve lands.

We have noticed over the years that in many cases the same vehicle would require another new valve body after only 60-70,000 miles. So, we decided that the best way to fix this issue was to eliminate channel plate flexing.

We developed a new plate made of billet aluminum that has shallow hydraulic circuits. It is made from a solid 1” piece of material. Machining away only what is necessary to ensure no warpage and a very solid foundation to bolt the valve body back to. Also, we have slightly moved some passages and eliminated those not necessary in hopes of stopping separator plate chafing and valve body breakage and cracking from high line pressure in performance applications.

With our new billet channel plate, the end user is able to use the stock hardware. They can also choose whether they want to use a bonded separator plate or a good used stock one. The customer can also apply stock or performance tuning with higher line pressure with our D-CF2 plate. We believe that with our plate there will be no more need in ever buying another valve body again.

We have done extensive testing to our plate to ensure zero warping. For an understanding of the durability we tested the strength of the plate. We put the stock plate on a press that has a pressure gauge. With the edges supported just like factory, we then put a 1.000-inch round bar in the center. At 300lbs of pressure the stock plate warped to .168 and then cracked. We then did the same to our plate. At 1 ton it did not move. We then went to 2 tons with barely any movement. Flex was .021.  Then we went to 5 tons and it was .047. So, we decided that we would give it 10 tons…. It flexed to .160 and out of fear we stopped. It didn’t return to zero, but it did however recover to .056

RevMax Separator Plate 68RFE-303:

Heavy duty valve body separator plate by RevMax is 2.5 times thicker than OEM!
This bonded plate will allow the user to run up to 250psi of pressure without any pump modifications!

Fits the 5-checkball style valve bodies (Gray solenoid pack connector)

Please visit our eBay store for more great components for your beast's transmission!

Use this text to share information about your product.

Blog posts